HF-VR343 4mm
Hikfire HF-VR343 Multi-IR Sensor + Professional AI flame detector + 2 IR Ref 4MP Fire Detection Camera, Sensor Type: Infrared pyroelectric: 4.3 um + 3.8 um, Max. Resolution: 2688×1520, 25 fps (2560 × 1440, 1920 × 1080, 1280 × 720), Color: 0.01 Lux @ (F1.6, AGC ON), BLC, 3D DNR, Smoke and flame detection, Indoor access blocked alarm, On/off duty alarm, Dangerous goods detection, Dangerous behavior detection, Fire Extinguisher Detection, Area Invasion Detection, Support MicroSD/MicroSDHC/MicroSDXC card, 30 m IR Range, 1 built-in microphone, 1 built-in speaker, Supports voice intercom, Thermography Alarm Shielded Area, Detection Range: within 30 meters(0.1 square meter fire pan), Fire and Smoke Detection, IP67.
Is our price higher than expected or showing as zero? Chat with us now for the best price and product availability. Prices if shown are inclusive of applicable taxes. Tax rate may be adjusted as per customer's taxation status. For supply of product only, excluding any cabling and/or installation. Shipping charges can sometimes vary.
Multi-IR Flame Detection Camera
Hikfire HF-VR343 Multi-IR Sensor + Professional AI flame detector + 2 IR Ref 4MP Fire Detection Camera
AI Intelligent Detection
Support AI intelligent detection: Smoke & flame detection, Indoor access blocked alarm, On/off duty alarm, Dangerous goods detection, Dangerous behaviour detection, Fire Extinguisher Detection, Area Invasion Detection.
Audio
Built-in Speaker & Microphone, supports two-way voice intercom
Sensor Type
Infrared pyroelectric: 4.3 um + 3.8 um, further enhancing the accuracy of flame alarms.
Resolution
Main Stream: 25 fps (2560 × 1440, 1920 × 1080, 1280 × 720)
Sub Stream: 25 fps (704 × 576, 640 × 480，352 × 288)
Detector
Thermography Alarm Shielded Area: Configure four rectangular areas
1/2.7" Progressive Scan CMOS ,
Detection Range: within 30 meters(0.1 square meter fire pan)
Fire and Smoke Detection: Yes
IR Range
Supports 30m infrared illumination
Intelligent Fusion Camera
supporting flame detection by sensing changes in infrared signals around the flame, & capable of video verification.
|
Camera |
|
|
Sensor Type |
Infrared pyroelectric: 4.3 um + 3.8 um |
|
Max. Resolution |
2688×1520 |
|
Main Stream |
25 fps (2560 × 1440, 1920 × 1080, 1280 × 720) |
|
Sub Stream |
25 fps (704 × 576, 640 × 480，352 × 288) |
|
Min. Illumination |
Color: 0.01 Lux @ (F1.6, AGC ON) |
|
Lens |
Horizontal: 78.96°, Vertical: 43.17°, Diagonal: 93.31° |
|
Image Settings |
Saturation, brightness, contrast, sharpness, AGC and white balance can be adjusted through the client or browser |
|
Adjusted Angle |
Horizontal: 0° ~ 360°; Vertical: 0° ~ 70°; Rotated: 0° ~ 360° |
|
WDR |
120 dB |
|
Shutter |
1/25 ~ 1/100,000 s |
|
Day/Night Switch |
IR cut filter |
|
Image Enhancement |
BLC, 3D DNR |
|
SVC Encoding |
H.264, H.265 |
|
H.265 |
Main Profile |
|
H.264 |
Main Profile/High Profile |
|
Main Stream Video Compression Standard |
H.265/H.264 |
|
Sub Stream Compression Standard |
H.265/H.264 |
|
Video Bitrate |
256Kbps ~ 8192Kbps |
|
General |
Anti flicker, Heartbeat, Mirror, Password protection, Video occlusion |
|
Intelligent Alarm |
Smoke and flame detection, Indoor access blocked alarm, On/off duty alarm, Dangerous goods detection, Dangerous behavior detection, Fire Extinguisher Detection, Area Invasion Detection |
|
Exception Detection |
Motion detection, Video tampering alarm, Network cable disconnection, IP address conflict, Invalid access, Full memory, Memory error |
|
WEB Configuration |
Support web preview, configuration and parameter import/export |
|
Protocol |
TCP/IP, HTTP, HTTPS, DHCP, DNS, RTP, RTSP, RTCP, NTP, IPv4, UDP |
|
Storage |
Support MicroSD / MicroSDHC / MicroSDXC card (max. 256 G), disconnection local storge, NAS |
|
Interface Protocol |
ONVIF (PROFILE S, PROFILE G), ISAPI, EZVIZ |
|
Power Consumption |
HF-VR343:≤10 W |
|
IR Range |
30 m |
|
Accessory Type |
Wall mounted support, pendent support, universal joint |
|
Detector |
|
|
Thermography Alarm Shielded Area |
Configure four rectangular areas |
|
Image Sensor |
1/2.7" Progressive Scan CMOS |
|
Alarm Indicator Light |
One, Red: Alarm; Yellow: Fault; Green: Normal |
|
Detection Range |
within 30 meters (0.1 square meter fire pan) |
|
Fire and Smoke Detection |
Yes |
|
Function |
|
|
Remote Silence |
Yes |
|
Interface |
|
|
Alarm Interface |
2 way alarm input ( Alarm in), 2 way alarm out ( Alarm out) |
|
Audio Interface |
1 built-in microphone, 1 built-in speaker, Supports voice intercom |
|
Auxiliary Power Interface |
Supports DC 12V output, power 1W |
|
Ethernet Interface |
1 RJ45 10 M/100 M adaptive Ethernet port |
|
General |
|
|
Power |
DC 12 V ± 25% |
|
Using Environment |
-30 ℃ ~ 60 ℃. Humidity 95% or less (non-condensing) |
|
Dimension (φ × H) |
Φ 130 × H 101 mm |
|
Weight |
407g |
|
Execution Standard |
Q/HKD 006-2019 |
|
Mounting Height |
Wall mounted: 2.4 m~2.8 m, Pendent: 3.3 m~6 m |
|
Ingress Protection |
IP67 |
|
Communication Mode |
HF-VR343:LAN |
|
Camera |
|
|
Sensor Type |
Infrared pyroelectric: 4.3 um + 3.8 um |
|
Max. Resolution |
2688×1520 |
|
Main Stream |
25 fps (2560 × 1440, 1920 × 1080, 1280 × 720) |
|
Sub Stream |
25 fps (704 × 576, 640 × 480，352 × 288) |
|
Min. Illumination |
Color: 0.01 Lux @ (F1.6, AGC ON) |
|
Lens |
Horizontal: 78.96°, Vertical: 43.17°, Diagonal: 93.31° |
|
Image Settings |
Saturation, brightness, contrast, sharpness, AGC and white balance can be adjusted through the client or browser |
|
Adjusted Angle |
Horizontal: 0° ~ 360°; Vertical: 0° ~ 70°; Rotated: 0° ~ 360° |
|
WDR |
120 dB |
|
Shutter |
1/25 ~ 1/100,000 s |
|
Day/Night Switch |
IR cut filter |
|
Image Enhancement |
BLC, 3D DNR |
|
SVC Encoding |
H.264, H.265 |
|
H.265 |
Main Profile |
|
H.264 |
Main Profile/High Profile |
|
Main Stream Video Compression Standard |
H.265/H.264 |
|
Sub Stream Compression Standard |
H.265/H.264 |
|
Video Bitrate |
256Kbps ~ 8192Kbps |
|
General |
Anti flicker, Heartbeat, Mirror, Password protection, Video occlusion |
|
Intelligent Alarm |
Smoke and flame detection, Indoor access blocked alarm, On/off duty alarm, Dangerous goods detection, Dangerous behavior detection, Fire Extinguisher Detection, Area Invasion Detection |
|
Exception Detection |
Motion detection, Video tampering alarm, Network cable disconnection, IP address conflict, Invalid access, Full memory, Memory error |
|
WEB Configuration |
Support web preview, configuration and parameter import/export |
|
Protocol |
TCP/IP, HTTP, HTTPS, DHCP, DNS, RTP, RTSP, RTCP, NTP, IPv4, UDP |
|
Storage |
Support MicroSD / MicroSDHC / MicroSDXC card (max. 256 G), disconnection local storge, NAS |
|
Interface Protocol |
ONVIF (PROFILE S, PROFILE G), ISAPI, EZVIZ |
|
Power Consumption |
HF-VR343:≤10 W |
|
IR Range |
30 m |
|
Accessory Type |
Wall mounted support, pendent support, universal joint |
|
Detector |
|
|
Thermography Alarm Shielded Area |
Configure four rectangular areas |
|
Image Sensor |
1/2.7" Progressive Scan CMOS |
|
Alarm Indicator Light |
One, Red: Alarm; Yellow: Fault; Green: Normal |
|
Detection Range |
within 30 meters (0.1 square meter fire pan) |
|
Fire and Smoke Detection |
Yes |
|
Function |
|
|
Remote Silence |
Yes |
|
Interface |
|
|
Alarm Interface |
2 way alarm input ( Alarm in), 2 way alarm out ( Alarm out) |
|
Audio Interface |
1 built-in microphone, 1 built-in speaker, Supports voice intercom |
|
Auxiliary Power Interface |
Supports DC 12V output, power 1W |
|
Ethernet Interface |
1 RJ45 10 M/100 M adaptive Ethernet port |
|
General |
|
|
Power |
DC 12 V ± 25% |
|
Using Environment |
-30 ℃ ~ 60 ℃. Humidity 95% or less (non-condensing) |
|
Dimension (φ × H) |
Φ 130 × H 101 mm |
|
Weight |
407g |
|
Execution Standard |
Q/HKD 006-2019 |
|
Mounting Height |
Wall mounted: 2.4 m~2.8 m, Pendent: 3.3 m~6 m |
|
Ingress Protection |
IP67 |
|
Communication Mode |
HF-VR343:LAN |
To install this Web App in your iOS device press
and then Add to Home Screen.